Just a quick bit of tech. If you're in Wordpress and you need to find every post that doesn't have a featured image set, here you go:

SELECT p.id `post_date` , `post_date` , `post_title` , `post_status` , `post_name` , `post_type` , `comment_count` FROM `wp_posts` pWHERE p.id NOT
ININ (
SELECT m.post_id AS `id`
FROM `wp_postmeta` mWHERE meta_key = '_wp_attached_file')AND p.post_type = 'post'AND post_date IS NOT NULL AND post_title <> 'Auto Draft'AND post_status = 'publish'AND 
post_date LIKE '2013%'

All part of the service.

Microsoft Tech Support

They do a decent job for their partners. Much better than Adobe.

Problem Description:

===================

v Unable to hit breakpoints in external JS files (always) or in code-behind VB (intermittent)

Resolution

=======

v Open key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\Main

v If it doesn't exist, add new DWORD named TabProcGrowth

v Set TabProcGrowth value = 0

Related links:

v http://blogs.msdn.com/greggm/archive/2009/04/01/script-debugging-broken-in-vs-2005-after-installing-ie8.aspx

v http://blogs.msdn.com/greggm/archive/2009/04/01/script-debugging-broken-in-vs-2005-after-installing-ie8.aspx

v http://social.msdn.microsoft.com/Forums/en-US/vsdebug/thread/e2c795cd-b7a0-4fad-b7c9-b1ca40d7302e/

v http://forums.asp.net/t/1419081.aspx

v http://bugcheck/Bugs/DevDivBugs/176287.asp

v http://bugcheck/Bugs/DevDivBugs/200561.asp

v http://bugcheck/default.asp?URL=/Bugs/VSWhidbey/611702.asp

Knowledge Base Articles:

=================

? Now you can request for Hotfix online

https://support.microsoft.com/contactus2/emailcontact.aspx?scid=sw;en;1410&WS=hotfix

? Latest Asp.NET developments –Check Scottgu Blogpost

http://weblogs.asp.net/scottgu/

? Product lifecycle link - http://support.microsoft.com/lifecycle/?p1=1249

? This article talks about "How to configure applications in IIS 6.0" - http://support.microsoft.com/default.aspx?id=814867

? This article talks about "How to configure security by using IIS 6.0" - http://support.microsoft.com/default.aspx?id=814874

? This article talks about "How to performance-tune your applications in IIS 6.0" - http://support.microsoft.com/default.aspx?id=814876

? This link talks about troubleshooting IIS http://technet2.microsoft.com/windowsserver/en/technologies/featured/iis/default.mspx

? Remote Logging in IIS : http://www.microsoft.com/technet/prodtechnol/WindowsServer2003/Library/IIS/a6347ae3-39d1-4434-97c9-5756e5862c61.mspx?mfr=true

? Remote Logging of W3SVC Logs: http://vkbexternal/VKBWebService/ViewContent.aspx?scid=SO;US;SOX041029700109

Quote of the Day

From what I can tell, Installshield only cares about one person: the dork who blindly builds the Installer package for their one little application. Apparently, if you need to call on the Installshield components, don’t ever even try to discover whether they’re already installed on the target. Instead, assume that they must *not* be installed (presumably because every developer on the planet has the privilege of being the first to get software installed on each PC where it’s being used), and always install a copy of some Installshield dependency on the end-user’s PC. And then for good measure, make sure that there’s a hard-coded dependency on the version of the InstallShield bits that went with the installer.

-ParanoidMike

Not Right

China is NOT supposed to be on the moon more than we are! We need to go back.

Configuring a Linksys WRT54G Wireless Router as an Wireless Access point.

Yes, you can do this. You will need to do the following:

1) Power down your entire system. Disconnect the WRT54G from all other devices, wait one minute, power up the WRT54G and allow it to fully boot, then reset the WRT54G to factory defaults. Power down the WRT54G.

2) Then connect one computer, by ethernet cable, to a LAN port on the WRT54G, then power up the WRT54G and computer, and make the following changes in the WRT54G:

a) set the "Local IP address" to 192.168.1.2 (this assumes that your primary router is set to 192.168.1.1 and you are not using 192.168.1.2 elsewhere in your network)

b) set the "DHCP server" to "disabled"

c) Save your settings. You may be disconnected from the router at this point. Do not worry about it.

d) Exit your browser and power down your entire system.

3) Next, wire any LAN port from your primary router to any LAN port on the WRT54G. Do not connect anything to the Internet port on the WRT54G.

4) Power up your system. It should work. Note that your primary router will control all router settings ( DHCP server, port forwarding, firewall, etc.). Your WRT54G will only control your wireless settings.

5) I assume your primary router is also wireless. If so, set the two routers as follows:

SSID: same in both routers (do not use "linksys" )
SSID broadcast: enabled in both
Encryption: same in both
Encryption key: same in both
Channel: set routers to different channels. Ideally routers should be 5 or more channels apart. Usually channels 1, 6, and 11 work best.

Thank you, toomanydonuts